Ford Transit Custom May 2016-2024 Twin Lens Brake Light Reversing Camera | CAM007FTC LED TW
Ford Transit Custom May 2016-2024 Twin Lens Brake Light Reversing Camera | CAM007FTC LED TW

Ford Transit Custom May 2016-2024 Twin Lens Brake Light Reversing Camera | CAM007FTC LED TW

  • Dual-view CVBS 700 TVL brake light camera for Ford Transit Custom with LED brake light (May 2016 – 2024).
  • Twin-lens design provides a reversing view and a separate rear-view camera for use while driving.
  • Upgraded PC4089 image sensors with high-quality all-glass composite lenses for clear and reliable images.
  • Downward-facing reversing camera includes infrared night vision for low-light conditions.
  • Outputs standard CVBS (NTSC) signals compatible with most aftermarket monitors and head units.
  • Factory-fit LED brake light replacement backed by a 2-year Revcamuk guarantee.

16 in stock

16 in stock

Ford Transit Custom Dual-View Brake Light Reversing & Rear-View Camera – LED Version (CVBS 700 TVL) | CAM007FTC LED TW

The CAM007FTC LED TW CVBS Dual-View Brake Light Camera is designed for Ford Transit Custom vans from approximately May 2016 to 2024 that use the later LED-type centre brake light. It replaces the original factory LED brake light and integrates two separate cameras: a downward-facing reversing camera and a horizontally aimed rear-view driving camera, all within a tidy, factory-style housing.

The downward-facing camera monitors the area directly behind the vehicle when reversing, while the second camera looks further down the road to provide a useful rear-view image while driving. Both cameras use our long-proven PC4089 image sensor, paired with high-quality all-glass composite lenses, producing clear and reliable 700 TVL CVBS images with good colour and contrast. We’ve used this sensor for many years because we know it performs reliably to a high standard and it outperforms many lower-down versions commonly found elsewhere.

If your Transit Custom uses the earlier bulb-type brake light (2012 – May 2016), this version will not fit. Please use the bulb twin-view version instead.


Key features

Factory-fit LED brake light replacement – Designed specifically for Ford Transit Custom models from May 2016 onwards with the factory LED brake light, retaining a clean OEM-style appearance.

Dual-view twin-lens design – Two independent cameras built into one brake light housing: one dedicated to reversing and one for rear-view visibility while driving.

Clear and reliable CVBS (NTSC) image from twin PC4089 sensors – Both cameras output standard CVBS NTSC video signals, making them compatible with the vast majority of aftermarket reversing camera monitors, dash displays and head units. The upgraded PC4089 sensors deliver clear and reliable 700 TVL images with natural colours and good contrast, selected for long-term performance.

High-quality all-glass composite lenses – Uses all-glass composite lenses rather than plastic-glass alternatives. This helps maintain clarity over time and avoids UV sun-fade and softening issues commonly seen with cheaper lenses.

Infrared night vision on the reversing camera – The downward-facing reversing camera is fitted with infrared LEDs to assist when reversing in low-light conditions or complete darkness.

OEM-style LED brake light housing – Replaces the original LED brake light for a tidy, factory-fitted appearance with no additional housings or external modules.

IP68 waterproof construction – Fully sealed IP68 housing, proven to withstand the worst the British weather can throw at it and suitable for year-round outdoor use.

Supplied with 7-pin main connector and splitter adaptor – Supplied with a 7-pin output and a 7-pin to 2 × 4-pin adaptor, allowing straightforward connection using standard 4-pin CVBS cabling.

Optional adaptors and extension cables – Optional 4-pin to RCA adaptors and 10 m to 15 m extension cables are available to suit different installation layouts and longer vehicles.

UK tested and supplied with a 2-year Revcamuk guarantee – With almost 20 years in the reversing camera industry, we’ve worked with a wide range of factories. These dual-view brake light cameras come from one of the best manufacturers we use and are fully supported with our 2-year Revcamuk guarantee. If a non-user-damage fault develops within two years, we’ll replace the camera to keep you reversing safely.


Vehicle fitment

Compatible with the following vehicle:

  • Ford Transit Custom (May 2016 – 2024, LED brake light version)

For earlier bulb-type models (2012 – May 2016), please use the bulb twin-view version.


What’s in the box

  • CVBS dual-view brake light camera – LED version (CAM007FTC LED TW)
  • 7-pin main connector
  • 7-pin → 2 × 4-pin adaptor
  • Optional 4-pin → RCA adaptors and/or 10 – 15 m extension cables (if selected)

Add a monitor and cable with one of our premium brake light reversing camera kits

If you’d like a complete reversing camera kit for your Transit Custom, including a display, the kits below pair this camera with suitable monitors and cabling, all backed by our 2-year guarantee.

Instructions

Fitting a 4 pin reverse camera – including using adaptors to RCA/Phono

See our general guide to installing 4 pin reversing cameras.  This includes fitting to stereos inc Kenwood / Sony / Pioneer etc.

Fitting guide for 4 pin reversing cameras including to stereo headunits

Technical Specs

Rear View Camera (Upper camera)

Sensor: 1/3 PC4089 CMOS
Effective Pixels: 976(H) x 592(V)
TV line: 700 TVL
Lens: 2.6mm
Min illumination: 0.1 LUX
Waterproof: IP68
View angle: V 65 degrees, H 80 degrees D 105 degrees
Camera lens adjustment: 20 degrees up and down
Voltage: 12 volts
Current consumption: 150mA
Operating temperature: -20 to 70 degrees C
Certificates: FCC, CE, E-mark, RoHS
Connector: 4 pin aviation

Reversing Camera (Lower camera)

Sensor: 1/3 PC4089 CMOS
Effective Pixels: 976(H) x 592(V)
TV line: 700 TVL
Lens: 1.9mm
Min illumination: 0.0 LUX (IR LED on)
IR LEDs: 8 pcs
Night vision: 10m
Waterproof: IP68
View angle: V 85 degrees, H 130 degrees D 160 degrees
Camera lens adjustment: 20 degrees up and down
Voltage: 12 volts
Current consumption: 150mA
Operating temperature: -20 to 70 degrees C
Guideline: Optional (some have a trigger wire to select)
Certificates: FCC, CE, E-mark, RoHS
Connector: 4 pin aviation