Twin-Lens Reversing & Driving Camera Kit with 7″ Dash Monitor – Sony CCD or 1080P High Definition Camera | PM63B
Twin-Lens Reversing & Driving Camera Kit with 7″ Dash Monitor – Sony CCD or 1080P High Definition Camera | PM63B
£249.00 £279.00Price range: £249.00 through £279.00 Select options

Twin-Lens Reversing & Driving Camera Kit with 7″ Dash Monitor – Sony CCD or 1080P High Definition Camera | PM63B

  • This reversing camera kit comes with surface mounted monitor display, fitted with a 7″ LCD panel. This monitor comes with a dashboard mounting bracket, but also fits other mounting brackets.
  • Comes with a twin lens bracket camera, which houses both a 120° reversing camera for parking, and a 45°rear view camera for driving.
  • Choice of two top specification image sensors – either Sony CCD or Sony 1080P AHD (see more about the upgrade option further down).
  • The camera is fitted with a stainless steel bracket, which has proven itself to protect against rust.
  • Easy to install, with a range of power options. Just one power connection powers the system.
  • 2 Year Guarantee and Lifetime Support from the leading UK specialists.

Price range: £249.00 through £279.00

Clear

Black Twin-Lens Bracket Reversing & Driving Camera Kit with 7-inch Dash Monitor

The PM63 is a twin-lens reversing and driving camera system built for vans, motorhomes, and HGVs. It combines a 7-inch dash-mounted display with a twin-lens bracket camera that offers both a 120° wide-angle reversing view and a 45° rear-view driving perspective. Comes standard with a Sony CCD 700TVL image sensor; you can choose the optional Sony AHD 1080P upgrade for sharper definition and even more vibrant colours. IP68 rated, stainless steel bracket, and robust design make it ideal for daily use.

Key features

  • 7-inch dash monitor with clear digital LCD panel
  • Twin-lens bracket camera: 120° wide for reversing + 45° rear-view driving
  • Choice of Sony CCD 700TVL (standard) or Sony AHD 1080P upgrade
  • Stainless-steel camera bracket for corrosion resistance
  • IP68 camera housing with anti-rust design
  • 12-24 V DC input with built-in surge protection
  • Durable 4-pin aviation connectors for secure, weatherproof wiring
  • Optional lighter plug or fuse tap for installation flexibility
  • UK tested & supported, with a 2-year guarantee

More about this kit

Twin view flexibility: The dual lenses let you have one view looking directly behind for reversing/parking, and another looking down the road for rear-view driving. Easily switch between the two via the monitor or remote/trigger wire.

Upgrade option: The CCD version already delivers strong image quality. The AHD 1080P upgrade provides sharper definition and richer colours, with a clearer, more detailed picture across the 7-inch screen.

Wiring & water ingress note: Features an 8 mm disconnect joint option to help route cable through tight holes. This joint is *not waterproof* and must remain inside the vehicle. Leave a customer note during checkout if you want to run cables outside along the roof – we have a version without the 8mm joint.

Monitor & bracket quality: The 7-inch display is well-suited for dashboard mounting; the stainless bracket holds up well to the Great British weather. Excellent build for commercial and leisure users alike.

UK reliability: Every kit is tested at the factory and again in the UK. Parts like cables, IR LEDs, connectors & menu functionality are checked to ensure performance and longevity prior to dispatch.

Specification snapshot

Monitor 7-inch LCD, 2 inputs, PAL/NTSC auto, remote control
Camera Twin-lens stainless bracket: reversing + rear-view
Camera sensor Sony CCD 700TVL (standard) or Sony AHD 1080P (upgrade)
Viewing angles 120° wide (reversing) + 45° rear-view driving
Weatherproofing IP68 camera housing, stainless bracket
Power 12-24 V DC with surge protection
Guarantee 2-year UK warranty & lifetime support

What’s in the box

  • 7-inch dash monitor with bracket
  • Twin-lens stainless bracket camera (120° reversing + 45° driving lens)
  • Main harness and 4-pin camera lead (12.5 m standard length, with 8 mm joint option)
  • Standard hardwire lead; optional lighter plug or fuse taps
  • Additional monitor bracket options available via drop-down

Cable length guide

  • 5 m: small vans or cars
  • 10 m: medium vans or vehicles ~6m long
  • 12.5 m: vans, motorhomes up to ~8.5 m
  • 15 m: large motorhomes or longer vehicles
  • 20 m: very long vehicles/HGVs

Supplied with one aviation 4-pin cable — select length & connector options at checkout.

Instructions

Main Kit fitting instructions

Our general 4 pin cable based fitting instructions.

4 pin reversing camera kit fitting instructions

Monitor Instructions (Default option)

Instructions for our MON16 dash monitor. including the fitting and operation.

Monitor Instructions (Sony AHD option)

Covers the operation of the AHD version of our 7 inch stand on dash monitor

MON16AHD AHD reversing camera monitor instructions

Twin Lens Camera Fitting Instructions

Covers the fixing of our twin lens reversing camera to the vehicle

Technical Specs

Standard Kit Sony CCD 700TVL Tech Specs

Monitor

7” Colour LCD screen
Audio Output: 0.5W
Loudspeaker: one 15x40mm round loudspeaker
Power supply: 12V/24V
Power Consumption: 4W Max
Digital Screen Resolution: 800 x3(RGB)x480
Contrast: 500:1
Brightness: 400cd/m2
Viewing Angle: U: 50 degrees/ D: 60 degrees, R/L: 70 degrees
Operating Temperature: -10C to +65C
Storage Temperature: -30C to +80C RH90%
2 Inputs
PAL/NTSC/AUTO
Mirror/Normal Switch on both channels
Full function Remote Control

Camera

Image Sensor :1/3 SONY CCD 960H 700TVL
TV System: PAL
Effective Pixels: 976*582
Minimum Illuminstion: 0.01 LUX
S/N Ratio: ≥48dB(AGC OFF)
Horizontal Resolution: 700 TV lines
Video Output:1.0vp-p,75Ohm
Backlight compensation: Auto
Vibration Rate: 4G
Built-in Lens: 3.6mm / 8.0mm
Lens Angle: 120° (D) / 85°(H)
Working Temperature: -20℃ to 80℃ RH95% Max
Storage Temperature: -30℃ to 85℃ RH95% Max
Waterproof to Ip68
18 Infra red LEDs to provide night view (approx 5-10M effective range)
Mirror image
Stainless Steel Bracket (painted)

Upgrade Kit Sony AHD 1080P Tech Specs

Monitor

7” Diagonally Measured Colour IPS screen
Power supply: 12V/24V
Power Consumption: 7.5W Max
Audio Output: 0.5W
Loudspeaker: one 15x40mm round loudspeaker
Digital Screen Resolution: 1024 x3(RGB)x600
2 Hybrid Inputs
PAL/NTSC/AUTO
Full function Remote Control

Camera

Image sensor and chips: FH8550M+C2398
Resolution: 1920*1080P (2 million pixels)
Night Vision: Yes
Wide Dynamic: Support (mobile frame rate 100DB)
SNR: >52DB (AGC OFF)
System: PAL
Image: Mirror image
Waterproof Level: IP68
Shockproof Level: 4G
Connectors: 4 Pin aviation
Power Supply: 12V (our monitors supply 12V to the camera regardless of their input voltage)
Power Consumption: Approx 1.8W per camera
Video Output: 1080P
Working Temperature: -20°C to +70°C
Storage Temperature: -30°C to 85°C
Stainless Steel Bracket (painted)
Built-in Lens: 3.6mm / 8.0mm

Monitor Bracket Options

Additional monitor bracket/mount options

We can supply a discounted additional mount/bracket for the monitor when ordered at the same time as the kit.  Please see the photo below, and make your selection using the drop down menu above the add to cart button.

See our video below for details about the brackets in the photo above.

Power Options Info

Choice of kit power options

  • On the monitor wiring harness is a 2.1mm DC socket. On the drop down menu of this product, you can select your desired power lead to plug in to this.
  • The standard hardwiring is supplied with all options, this terminates in a red wire (+12V/+24V), and black wire (earth).
  • For the ultimate quick install is a lighter plug option. Some people also order this just for the initial setup, before changing to the standard hardwiring/fuse tap.
  • Fuse taps aka piggyback fuse holders, are the most recent addition to our options. This allows you to “piggyback” off an existing circuit from your fuse box. The most common size fuse found in modern vehicles is the mini blade (size = 10.9mm wide x 16.4mm tall), older vehicles are likely to have the standard blade (size = 19.1mm wide x 18.8mm tall). Download and read our Fuse Tap installation instructions PDF for more information.
  • Our fuse taps were designed by us, they have a 200cm lead that connects directly to the monitor socket with no soldering / crimping required. There is a black wire with an earth terminal attached – designed to fix to a chassis bolt/screw.  This earth wire/terminal can be separated away from the red wire to enable you to find the most convenient ground/earth (although often this is next to the fuse box).
Power Supply Options including lighter plug and piggyback fuse taps