RV207 compatible adaptor + driving camera bundle | CAB99M+CAM222W-45
RV207 compatible adaptor + driving camera bundle | CAB99M+CAM222W-45

RV207 compatible adaptor + driving camera bundle | CAB99M+CAM222W-45

The RV-207 reverse camera is often seen on Swift, Autotrail, and Bessacarr motorhomes.  It is a twin camera system that runs to a Sargent Electrical EM5 series control box.  This bundle is for a compatible driving camera, plus an adaptor lead to convert it to the 6 pin connector required.  The camera is fitted with a high spec 1/3″ Sony CCD image sensor, and an 8mm lens to give 45 degrees (the best angle for rear view/always on driving).  As our camera uses a 4 pin connector, this bundle includes a discounted adaptor, which converts our 4 pin connector to the same 6 pin connector required on the original cabling.  We have sold many hundreds of these bundles over the years with total success.

£70.00

40 in stock

About the Swift, Autotrail, Bessacarr RV-207 compatible reverse camera/adaptor set

  1. The RV-207 reverse camera is often seen on Swift, Autotrail, and Bessacarr motorhomes. It is a twin camera system that runs to a Sargent Electrical EM5 series control box. This discounted bundle includes compatible driving camera, plus an adaptor lead to convert it to the 6 pin connector required. 
  2. The camera is fitted with a high spec 1/3″ Sony CCD image sensor, and an 8mm lens to give 45 degrees (the best angle for rear view/always on driving). 
  3. As our camera uses a 4 pin connector, this bundle includes a discounted adaptor, which converts our 4 pin connector to the same 6 pin connector required on the original cabling. 
  4. We have sold many hundreds of these bundles over the years with total success.

Image Sensor for Camera

The image sensor fitted inside the camera is Sony’s 1/3″ CCD 700TVL version.  We consider this joint best in terms of performance, in non high definition cameras (HD cameras require special monitors). Rest assured that the quality of the image will be very good with this camera.

image sensor inside camera

Instructions

Swift Motorhome Reversing Camera Adaptor Instructions

Instruction guide for installing our reversing camera adaptors – used for replacing parts in a twin camera system fitted to some Swift Motorhomes.

Swift Motorhome Replacement Reversing Camera Adaptors

Technical Spec (Camera)

Image Device:1/3 SONY 811 CCD 960H 700TVL
TV System: PAL
Effective Pixels: 976*582
Apect Ratio of output: 4:3
Scanning System: 2:1 Interlace
Sync. System: Internal
Resolution: 700 TV lines
Minimum Illumination:0 Lux (IR LEDs on)
Waterproof to Ip68
Infrared LEDs to provide night view
8mm – 45-degree lens
Mirror image