About the Twin Lens Ducato/Boxer/Relay brake light reverse camera kit with 5 inch display
This is our very latest addition to the brake light camera kits. We have had the single-lens version of this camera for a number of years now, we were frequently told by customers that they would love an option to view behind whilst driving (like our twin-lens cameras), well after some development with one of the factories we use we are finally able to offer this fantastic solution. Two cameras in a tidy “factory look” housing, the old LED strip is removed from your old light and placed into this camera housing. Run the cable to the monitor, supply power and that is it (we even do a lighter plug option to make it even easier if required.
This particular camera kit is supplied with a 5 inch high resolution dash monitor, this is supplied with a U bracket mount as standard but a variety of other brackets can be selected here.
Please note:- some early rare models of this van have a different style brake light that bolts from the rear, the majority have the screw from the front version as used in this kit. If you can see screws when viewing your van from outside then this kit should fit.
What vehicle does this fit?
Fiat Ducato 2006-Present (with screw from the front fixings)
Citroen Relay 2006-Present (with screw from the front fixings)
Peugeot Boxer 2006-Present (with screw from the front fixings)
Fitting the brake light camera
Fitting the brake light camera is very simple. The brake light reversing camera re-uses your existing brake light strip. Simply remove the existing brake light via the two securing cross head screws. Gently release the three tabs on the top and bottom of the brake light to release the light strip. Then transplant this in to the new brake light camera. Re-screw this back to your vehicle with the two original screws.
See our video below for details about fitting the brake light camera
Add an additional monitor bracket/mount
We can supply a discounted additional mount/bracket for the monitor when ordered at the same time as the kit. Please see the photo below, and make your selection using the drop down menu above the add to cart button.
See our video below for details about the brackets in the photo above.
Choice of kit power options
- On the monitor wiring harness is a 2.1mm DC socket. On the drop down menu of this product, you can select your desired power lead to plug in to this.
- The standard hardwiring is supplied with all options, this terminates in a red wire (+12V/+24V), and black wire (earth).
- For the ultimate quick install is a lighter plug option. Some people also order this just for the initial setup, before changing to the standard hardwiring/fuse tap.
- Fuse taps aka piggyback fuse holders, are the most recent addition to our options. This allows you to “piggyback” off an existing circuit from your fuse box. The most common size fuse found in modern vehicles is the mini blade (size = 10.9mm wide x 16.4mm tall), older vehicles are likely to have the standard blade (size = 19.1mm wide x 18.8mm tall). Download and read our Fuse Tap installation instructions PDF for more information.
- Our fuse taps were designed by us, they have a 200cm lead that connects directly to the monitor socket with no soldering / crimping required. There is a black wire with an earth terminal attached – designed to fix to a chassis bolt/screw. This earth wire/terminal can be separated away from the red wire to enable you to find the most convenient ground/earth (although often this is next to the fuse box).
Easy-Fit Wiring
- We have been using this type of cabling since 2007, and it has performed perfectly in all of this time. It is called the 4 pin aviation cable, and uses what is known as a 4 pin GX12 connector.
- This type of connector is very durable, and can be kept outside exposed to rain and freezing temperatures.
- It makes fitting easier, and avoids CANBUS issues due to the monitor powering the camera.
- It keeps contacts clean and dry, plus prevents them from accidental separation.
- It has become the industry standard connector, which means you aren’t forced to buy future cameras/cables/upgrades from one retailer – as parts are interchangeable between numerous suppliers (although we are confident you will be impressed enough with us that you will choose us for any future upgrades/spare parts).
- All of our aviation extension cables are high quality, with the inner cores consisting of pure copper. We do not use the cheaper CCA (Copper Coated Aluminium) or CCS (Copper Coated Steel) cables, because they are more prone to failure/degradation over time.
Image Sensor for Camera
This particular system uses two of the 700TVL new generation CMOS sensor, which is right on the upper scale of picture quality.
Monitor has Digital LCD Panel – Not Standard LCD
The monitor uses a Hi-Res digital panel screen with more than 3 times the amount of pixels of the standard analogue LCD screens most other retailers sell. (Please note some sellers multiply the first number by 3 for RGB, if we were to do that it sounds even more impressive (2400×480). We prefer to keep it simple but check carefully our competitors, the last number is normally better to go by as this is the number of vertical lines of pixels.
2 Year Guarantee
We supply with a 2 year Guarantee with us, meaning we will repair or replace any non-user damaged parts that are deemed faulty. Our failure rate is very low even beyond these two years, if you have a problem outside of 2 years we should still have compatible parts and possible repairs for reasonable amounts.
Parts Tested in the UK
The parts of this kit will have been tested twice, once by the factory and once by us. We check all the items in the kit including all cables, trigger wires, IR leds and menu functions to reduce any chance of having a non working part. Our fault rate is extremely low, and we just like to ensure that we avoid any imperfection slipping past. This is why professional fitters love us.
