Mercedes Sprinter 2006-present and VW Crafter 2006-2017 Brake Light Reversing Camera | CAM906
Mercedes Sprinter 2006-present and VW Crafter 2006-2017 Brake Light Reversing Camera | CAM906

Mercedes Sprinter 2006-present and VW Crafter 2006-2017 Brake Light Reversing Camera | CAM906

  • CVBS 700 TVL brake light reversing camera for Mercedes Sprinter (2006–present) and VW Crafter (2006–2017).
  • Upgraded PC4089 image sensor with high-quality all-glass composite lens for clear and reliable image quality.
  • Outputs standard CVBS (NTSC) signal compatible with most aftermarket monitors and head units.
  • 160° diagonal wide viewing angle for confident reversing and manoeuvring.
  • IP68 waterproof housing built for year-round outdoor use.
  • OEM-style brake light replacement backed by a 2-year Revcamuk guarantee.

20 in stock

20 in stock

Mercedes Sprinter / VW Crafter Brake Light Reversing Camera (CVBS 700 TVL) | CAM906

This brake light camera is designed as a factory-style replacement for Mercedes Sprinter (2006–present) and Volkswagen Crafter (2006–2017). It replaces the upper brake light with an OEM-style housing that integrates a reversing camera, giving a tidy appearance while adding a clear and reliable parking view.

The camera uses our long-proven PC4089 image sensor, paired with a high-quality all-glass composite lens, producing a clear and reliable 700 TVL CVBS image with good colour and contrast. We’ve used this sensor for many years because we know it performs reliably to a high standard and it outperforms many lower-down versions commonly found elsewhere. A 160° diagonal viewing angle provides generous coverage behind the van, helping with everyday parking and manoeuvring.


Key features

OEM-style replacement – Installs directly in place of the factory brake light without drilling or modification, retaining a clean, built-in factory look.

Clear and reliable CVBS (NTSC) image from upgraded PC4089 sensor – Outputs a standard CVBS NTSC video signal compatible with the vast majority of aftermarket reversing camera monitors, dash displays and head units. The PC4089 sensor delivers a clear and reliable 700 TVL image with great colour replication and good contrast.

High-quality all-glass composite lens – Uses an all-glass composite lens rather than plastic-glass alternatives. This helps maintain clarity over time and avoids the UV sun-fade and “milky” look often seen with cheaper lenses.

160° diagonal wide viewing angle – Provides a wide and usable rear view when reversing, offering good coverage behind the vehicle to avoid any hazards.

IP68 waterproof construction – Fully sealed IP68 housing, proven to withstand the worst the British weather can throw at it and suitable for vehicles that live outside year-round.

4-pin aviation connector – Supplied with a standard 4-pin aviation connector, compatible with most aftermarket CVBS monitors and extension cables.

Optional extension cables – 5 m to 15 m 4-pin extension cables are available to suit short, medium and long wheelbase vans.

UK tested and supplied with a 2-year Revcamuk guarantee – With almost 20 years in the reversing camera industry, we’ve worked with a wide range of factories. These brake light cameras come from one of the best manufacturers we use and are fully supported with our 2-year Revcamuk guarantee. If a non-user-damage fault develops within two years, we’ll replace the camera to keep you reversing safely.


Vehicle fitment

Compatible with the following vehicle models:

  • Mercedes Sprinter (2006 – present)
  • Volkswagen Crafter (2006 – 2017)

Not suitable for the 2018-onward new-shape Volkswagen Crafter.
For newer Crafter models, please see our 2017+VW Crafter Brake Light Reversing Camera Listing.


What’s in the box

  • CVBS brake-light reversing camera (CAM906)
  • Optional 4-pin → RCA adaptor (if selected)
  • Optional 5 – 15 m 4-pin extension cable (if selected)

Add a monitor and cable with one of our premium brake light reversing camera kits

If you would like a complete reversing camera system with monitor and cabling included, the kits below pair this camera with suitable displays and cables, all backed by our 2-year guarantee.

Instructions

Fitting a 4 pin reverse camera – including using adaptors to RCA/Phono

See our general guide to installing 4 pin reversing cameras.  This includes fitting to stereos inc Kenwood / Sony / Pioneer etc.

Fitting guide for 4 pin reversing cameras including to stereo headunits

Fitting guide for the Mercedes Sprinter / VW Crafter Brake Light Reversing Camera

Instructions on how to fit the reversing brake light camera supplied, including removing light strip from existing brake light and placing in to the new brake light housing.

Instructions for fitting a brake light Reversing Camera for the Mercedes Sprinter and VW Crafter

Technical Specs

Sensor: 1/3″ PC4089 CMOS
Effective Pixels: 976(H) x 592(V)
TV line: 700 TVL
Lens: 1.9mm
Min illumination: 0.0 LUX (IR LED on)
IR LEDs: 8 pcs
Night vision: 10m
Waterproof: IP68
View angle: V 85 degrees, H 130 degrees D 160 degrees
Camera lens adjustment: 20 degrees up and down
Voltage: 12 volts
Current consumption: 150mA
Operating temperature: -20 to 70 degrees C
Guideline: Optional (some have a trigger wire to select)
Certificates: FCC, CE, E-mark, RoHS
Connector: 4 pin aviation