Mercedes Sprinter / VW Crafter Twin Lens Brake Light Reversing + Rear View Camera | CAM906TW
Mercedes Sprinter / VW Crafter Twin Lens Brake Light Reversing + Rear View Camera | CAM906TW

Mercedes Sprinter / VW Crafter Twin Lens Brake Light Reversing + Rear View Camera | CAM906TW

This camera has been designed to replace your LED brake light to add a camera.

24 in stock

24 in stock

About the Mercedes Sprinter / VW Crafter brake light reversing + rear view camera

  • This is ideal for the Mercedes Sprinter (2006-Present) and Volkswagen Crafter (2006-2017) to replace an existing brake light.
  • This version also has a 2nd camera built in for always on rear view driving camera – makes this camera useful all the time whilst driving.
  • The camera is a ball design and is fitted in to a larger overhang moulding to give it more overhang to see towballs etc.
  • The ball camera can be angled up/down to give the ideal view.
  • The image sensor we have installed is one of the latest generation 700TVL premium CMOS, which gives a really nice clear picture.
  • The camera has the 4 pin plug on it’s fly lead.
  • The camera is waterproof up to IP68.
  • The original LED strip is used from the old brake light – this means no CANBUS warnings.

What vehicle does this fit?

Mercedes Sprinter 2006-Present

VW Crafter 2006-2017


Image Sensor for Camera

This particular system uses the PC4089 1/3″ Hi-Res CMOS image sensor (not to be confused with the older technology low res CMOS), this runs at 700TVL and gives a really crisp picture with a good colour replication. We use 4xglass composite lens instead of the cheaper 2xglass, 2xplastic lenses, which cloud/fade over time due to UV exposure. With our camera you can be assured of good performance and long term reliability.

Image sensor key

Add a monitor and cable with one of our premium brake light reversing camera kits

If you would like a complete reversing camera kit for your van, including a display, please check out our links below. The kits come with this camera, a quality monitor, cabling, and a 2 year guarantee.

Instructions

Fitting a 4 pin reverse camera – including using adaptors to RCA/Phono

See our general guide to installing 4 pin reversing cameras.  This includes fitting to stereos inc Kenwood / Sony / Pioneer etc.

Fitting guide for 4 pin reversing cameras including to stereo headunits

Fitting guide for the Mercedes Sprinter / VW Crafter Brake Light Twin Driving + Reversing Camera

Instructions on how to fit the driving + reversing brake light camera supplied, including removing light strip from existing brake light and placing in to the new brake light housing.

Instructions for fitting a brake light Reversing Camera for the Mercedes Sprinter and VW Crafter

Technical Specs

Rear View Camera (Upper camera)

Sensor: 1/3 PC4089 CMOS
Effective Pixels: 976(H) x 592(V)
TV line: 700 TVL
Lens: 2.6mm
Min illumination: 0.1 LUX
Waterproof: IP68
View angle: V 65 degrees, H 80 degrees D 105 degrees
Camera lens adjustment: 20 degrees up and down
Voltage: 12 volts
Current consumption: 150mA
Operating temperature: -20 to 70 degrees C
Certificates: FCC, CE, E-mark, RoHS
Connector: 4 pin aviation

Reversing Camera (Lower camera)

Sensor: 1/3 PC4089 CMOS
Effective Pixels: 976(H) x 592(V)
TV line: 700 TVL
Lens: 1.9mm
Min illumination: 0.0 LUX (IR LED on)
IR LEDs: 8 pcs
Night vision: 10m
Waterproof: IP68
View angle: V 85 degrees, H 130 degrees D 160 degrees
Camera lens adjustment: 20 degrees up and down
Voltage: 12 volts
Current consumption: 150mA
Operating temperature: -20 to 70 degrees C
Guideline: Optional (some have a trigger wire to select)
Certificates: FCC, CE, E-mark, RoHS
Connector: 4 pin aviation